Voriger Thread
Nächster Thread
Drucke Thread
Rate Thread
Joined: Jun 2016
Posts: 50
on the road
OP Offline
on the road
Joined: Jun 2016
Posts: 50
For the Geek-people of the world.... here's the detail on Cuthbert's leisure battery AGM to lithium LiFePO4 up-grade 🤓💡🛠💥

http://www.tuckstruck.net/truck-and-kit/modifications-and-repairs/lithium-leisure-battery-lifepo4/

Zuletzt bearbeitet von Marcus Tuck; 13/05/2018 00:55.
::::: Werbung ::::: TR
Joined: Feb 2006
Posts: 74
Likes: 2
Das wird noch
Offline
Das wird noch
Joined: Feb 2006
Posts: 74
Likes: 2
Hello Marcus,
like always, a perfect docu ----thanx

keep the rubberside down ;-)

Joined: Jan 2016
Posts: 351
Likes: 1
D
Enthusiast
Offline
Enthusiast
D
Joined: Jan 2016
Posts: 351
Likes: 1
When designing the technical part of my cabin I have also opted for LiFePo battery. The gravymetric weight saving based on the useable energy level is impressive compared to Lead-Acid.

It is am Mastervolt with 110Ah.

Charge controll is being done by a Votronic Tripple wich combines a PV MPP tracker, supplied by two thin film pannels with 200 Wp, alternator charge booster and grid charger.

Since everything is still in the build-up phase I do have very little experience...


I have encountered one mildly annoying draw back of the LiFePo battery: Is seems to have a build in electric fuse. Trying to run my 2 cylinder 600 W 12V - the initial start up current might be well over the rated 50amps - compressor on it,always triggered the fuse... I finally had to draw a 10 or 16? mm2 cable to the starter bat. Grrrreat!

Cheers Volker


Joined: Jun 2016
Posts: 50
on the road
OP Offline
on the road
Joined: Jun 2016
Posts: 50
I did look at a few battery options. There are several that contain the BMS and all the circuit protection within a sealed unit. This has the advantage of being able to be swapped directly into the place of a lead acid battery and not require any external wiring or protection. However, I quite like to mess about with things in detail and am quite happy with electronics. I also like the Victron products I already have. Therefore, I went for the Victron batteries and added the extra circuitry required. The maximum recommend discharge rates of my batteries is 90 amps continuous (270 amps is the maximum continuous) and 900 amps for a 10 seconds pulse. As I have 3 batteries paralleled that allows 270 amps continues and 2700 amps for 10 seconds!!! I have fitted 100 amp fuses to each battery as I can’t really see me needing more than 300 amps, even when winching.


Link Copied to Clipboard
Forum Search
Member Spotlight
berlinator
berlinator
mitten im tiefsten Tiergarten
Posts: 108
Joined: June 2005
May
M D M D F S S
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
::: VIERMALVIER.DE::: Werbung ro
Aktivste Themen(Ansichten)
17,656,686 Hertha`s Pinte
7,427,875 Pier 18
3,502,046 Auf`m Keller
3,351,853 Musik-Empfehlungen
2,518,254 Neue Kfz-Steuer
2,336,113 Alte Möhren ...
Wer ist online
2 members (oldie, 1 unsichtbar), 373 guests, and 0 robots.
Key: Admin, Global Mod, Mod
::WERBUNG:: Klick to sponsor VMV
Top Likes Received (30 Days)
DaPo 3
WoMoG 3
GSM 2
BedaB 2
oldie 1
Troll 1
Heutige Geburtstage
Black Crawler, Michael_P
Neueste Mitglieder
ChristianW, Darktime, Hehomarco, Dzakob, Egika
9,898 Registrierte Benutzer
Top Schreiber
DaPo 26,383
Yankee 16,494
Ozymandias 16,237
ranx 16,049
RoverLover 15,075
:::: VIERMALVIER.DE:::: WERBUNG
Foren Statistiken
Foren36
Themen44,259
Posts671,796
Mitglieder9,898
Most Online1,320
Jan 2nd, 2020
Powered by UBB.threads™ PHP Forum Software 7.7.5